再生混凝土抗压强度试验研究

设计3种不同再生骨料取代率的再生混凝土立方体试件，分别在7 d、14 d、28 d、100 d龄期进行抗压强度试验，结果表明：长龄期再生混凝土立方体抗压强度有所增大，但高取代率比低取代率的抗压强度降低，再生混凝土后期强度增长速率高于普通混凝土。对试验室实测的再生混凝土立方体抗压强度与试验龄期进行拟合，拟合结果相关系数均大于0.97，吻合结果较好。     

Design and Analysis of New Micromixers Based on Distillation Column Trays

Four passive micromixer designs (G1, G2, G3, and G4) based on distillation columns trays are proposed. The performance of the devices is assessed by numerical simulations. The mixing performance is investigated for different Reynolds numbers and channel heights for oil/ethanol flow. G1 and G4 designs provided a high mixing index. The G1 device achieved superior mixing performance with a moderate pressure drop due to the induced flow recirculation pattern for a relatively high flow rate, highlighting the potential use of such microdevice for scale-up and numbering-up of microdevices in modular chemical plant processing.     

Ballistic behavior of plain and reinforced concrete slabs under high velocity impact

This work presents a numerical simulation of ballistic penetration and high velocity impact behavior of plain and reinforced concrete slabs. In this paper, we focus on the comparison of the performance of the plain and reinforced concrete slabs of unconfined compressive strength 41 MPa under ballistic impact. The concrete slab has dimensions of 675 mm × 675 mm × 200 mm, and is meshed with 8-node hexahedron solid elements in the impact and outer zones. The ogive-nosed projectile is considered as rigid element that has a mass of 0.386 kg and a length of 152 mm. The applied velocities vary between 540 and 731 m/s. 6 mm of steel reinforcement bars were used in the reinforced concrete slabs. The constitutive material modeling of the concrete and steel reinforcement bars was performed using the Johnson-Holmquist-2 damage and the Johnson-Cook plasticity material models, respectively. The analysis was conducted using the commercial finite element package Abaqus/Explicit. Damage diameters and residual velocities obtained by the numerical model were compared with the experimental results and effect of steel reinforcement and projectile diameter were studies. The validation showed good agreement between the numerical and experimental results. The added steel reinforcements to the concrete samples were found efficient in terms of ballistic resistance comparing to the plain concrete sample.     

Experimental study and CFD numerical simulation of an innovative vapor splitter in dividing wall column

The vapor split ratio (R_V) adjustment plays an important role on energy efficiency during dividing wall column (DWC) operation. In order to achieve active control of R_V, this aticle presents an innovative vapor splitter driven by hydraulics. The vapor flows into main tower from prefractionation section through the rectangle hole located at the end of the partition. Vapor splitting is implemented by the change of flow resistance at the rectangular hole caused by adjusting the liquid level on the bottom plate. This design makes full use of the hydraulic properties in DWC, employing simpler construction with single tunable parameter. Numerical simulations and laboratory tests were both carried out to validate its performance in the DWC with a diameter of 600 mm. The results demonstrate that the desired R_V can be handled effectively in the approximate range from 0.5 to 2, basically satisfying the industrial demand for the gas distribution.     

复杂炼油塔模拟的改进联立方程内外层算法

在内外层算法的基础上，采用联立方程思想将主塔、侧线汽提塔视为一个整体进行建模，并针对复杂炼油塔的特点对算法提出了改进。首先，由于传统内外层法简化的K值模型对组成的变化不敏感，在处理带有石油的体系时，容易出现迭代次数较多，甚至部分塔板温度更新异常的问题，因此采用了汽相分数加和式推导了简化的K值模型加权因子。其次，借鉴流量加和法思想，规定侧线汽提塔的塔底产品流量作为设计变量，增强了算法收敛的稳定性。为验证改进后算法的有效性，采用不同的算法对实际的常压塔进行了模拟，结果显示改进后的算法适合应用于复杂炼油塔的模拟计算。     

边坡支护施工技术在肯尼亚某大坝工程中的应用

肯尼亚斯瓦克大坝项目位于肯尼亚东南部,是通过修建一座混凝土面板堆石坝蓄水,开发河水资源用以供水、发电和灌溉多功能一体化的工程。苏州中材建设有限公司负责施工的溢洪道土石方开挖,涉及溢洪道两边边坡支护技术。文章详细介绍了该工程的边坡支护施工过程,提出了其施工质量保证措施和支护工程质量通病处理工艺及措施。     

水泥辊压机终粉磨系统的工业化应用

介绍了水泥辊压机终粉磨系统及运行情况,与辊压机联合粉磨系统生产的水泥以及所配制的混凝土进行了对比,水泥辊压机终粉磨系统电耗大幅降低,两种水泥所配制的混凝土性能相当。     

Interaction of two in-line bubbles of equal size rising in viscous liquid

The interaction of bubbles is the key to understand gas–liquid bubbling flow. Two-dimensional axis-symmetry computational fluid dynamics simulations on the interactive bubbles were performed with VOF method,which was validated by experimental work. It is testified that several different bubble interactive behaviors could be acquired under different conditions. Firstly, for large bubbles(d: 4, 6, 8, 10 mm), the trailing bubble rising velocity and aspect ratio have negative correlations with liquid viscosity and surface tension. The influences of viscosity and surface tension on leading bubble are negligible. Secondly, for smaller bubbles(d: 1, 2 mm), the results are complicated. The two bubbles tend to move together due to the attractive force by the wake and the potential repulsive force. Especially for high viscous or high surface tension liquid, the bubble pairs undergo several times acceleration and deceleration. In addition, bubble deformation plays an important role during bubble interaction which cannot be neglected.     

Direct extraction of Mo(VI) from sulfate solution by synergistic extractants in the rotation column

Direct extraction of molybdenum from sulfate solution with synergistic extractants (mixture of D₂EHPA and TBP) was studied in the rotation column. The influence of extractant concentration and initial pH of aqueous phase was studied in the bench scale experiments. The outcomes demonstrated that the synergistic solvent extraction enhances the constancy of the extracted complexes for transfer into the organic phase. In the continuous experiments, the effect of different operating parameters such as speed of agitation, inlet solvent flow rate and inlet aqueous flow rate on the holdup, mean drop size, drop size distribution, slip and characteristic velocities and extraction percentage were examined. Modified correlations were proposed for prediction of hydrodynamic parameters with consideration of reaction extraction condition in the rotation column. Furthermore, these correlations were compared with the experimental data. According to the results, the direct extraction of Mo (VI) from aqueous solution and sulfuric media with extraction efficiency of 90.4% was obtained at higher rotor speed (240 r·min^-1 rpm) in this column.     

Bubble size fractal dimension,gas holdup,and mass transfer in a bubble column with dual internals

As the scale of residual oil treatment increases and cleaner production improves in China, slurry bubble column reactors face many challenges and opportunities for residual oil hydrogenation technology. The internals development is critical to adapt the long-term stable operation. In this paper, the volumetric mass transfer coefficient, gas holdup and bubble size in a gas–liquid up-flow column are studied with two kinds of internals. The gas holdup and volumetric mass transfer coefficient increase by 120% and 42% when the fractal dimension of bubbles increases from 0.56 to 2.56, respectively. The enhanced mass transfer processing may improve the coke suppression ability in the slurry reactor for residual oil treatment. The results can be useful for the exploration of reacting conditions, scale-up strategies, and oil adaptability. This work is valuable for the design of reactor systems and technological processes.